The F5 tmm is the heart at processing traffic for the F5 LTM SLB.
In our example the microkernel traffic shows under the "error" field a handler counters that's incrementing.
see the following snapshot and the highlighted area { arrow }
This is could be caused by numerous conditions.
static ARP for a address not bound on the LTM
inbound traffic for a service port not configured
traffic for a VS not on the LTM
etc.......
Speaking with a f5 support engineer, we didn't find any quick means for monitoring the specific traffic that triggers this counter , but you can lab this up and by using a static arp entry send a traffic request to the F5 and for a VS or Self not-reference for that dst-ip and you will see the counter increment per-request.
In our example the microkernel traffic shows under the "error" field a handler counters that's incrementing.
see the following snapshot and the highlighted area { arrow }
From the webGUI you have something similar;
This is not a error per-se . When the TMM tries to process a traffic flow for packets that it has no reference for, this counter will increment.This is could be caused by numerous conditions.
static ARP for a address not bound on the LTM
inbound traffic for a service port not configured
traffic for a VS not on the LTM
etc.......
Speaking with a f5 support engineer, we didn't find any quick means for monitoring the specific traffic that triggers this counter , but you can lab this up and by using a static arp entry send a traffic request to the F5 and for a VS or Self not-reference for that dst-ip and you will see the counter increment per-request.
No comments:
Post a Comment